Description: 3 METERS X 10 MILLIMETERS DOUBLE SIDED TAPE ACRYLIC FOAM WATERPROOF MOUNTING ADHESIVE AUTOMOTIVE HOME Directions:1. Check the piece to make sure it is the exact fit for your vehicle. Determine the location of where the piece will be going. 2. Make sure that you have washed and dried the surface on which the trim will go. 3. Remove any left-over adhesive on the vehicle. (Preferred method is a credit card and WD-40) Please be very careful and fragile on the paint, we are not responsible for any scratches or defects on the car. 4. Use a solvent to remove any left-over adhesive, oils, or wax. (It will affect the stickiness) 5. Use a clean cloth and alcohol to remove any solvent. Wash down with water, and dry with a clean microfiber towel. 6. Apply adhesive promoter to the surface which the trim will be applied to and the back side of the trim to where the double-sided tape will be mounted on. 7. Apply the exact amount of double sided tape to the trim. Make sure that your palms are dry, avoid wet and sweaty hands. 8. Use the palm of your hand, and a firm pressure to mount the emblem down. 9. Keep your car in a dry and warm area for the tape to stick on properly for at least 24 hours. Over time it'll be mounted down very firmly.
Price: 9.5 USD
Location: North Port, Florida
End Time: 2024-08-30T22:28:32.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: double sided adhesive tape
