2Pcs Gas Front Hood Bonnet Lift Supports Struts Shocks Props For Toyota Tacoma

Description: Brand New Top Quality 2Pcs Gas Charged Front Hood Bonnet Lift Supports Struts Springs Shocks Damper Props For Toyota Tacoma 2005-2015Please confirm the car model, the year and the location of the product that you install match your car before you purchase. Please contact us if you have any questions, we will reply you asap. This product is a professional part of the car, please install it on the car instead of pressing the damper by hand. Package Content:1set * Gas Lift Supports Struts Springs Shocks 2 ball brackets and 2 ball studs, washers and the 4 attachment endsFeatures:1，100% Brand New,High quality2，Material : Steel3，It's created to easily open and close your front hood effortlessly4，No Drilling required,easy to install with simple hand tools5，This is auto specific front bonnet damper replacement kit.On the basis of original equipment design and perfect engineered,make sure exact fit and function.6，This bonnet damper kit is made to fit specific vehicle model so it can utilize existing factory mounting point.7，Heavy gauge steel pressure tube offer longer life,teflon backup ring provides enhanced performance.8，Self clean piston parts achieves smooth operation and consistent performance.More flexible & convenient for hood lift,the installation is easy and does not require any sort of modification or drilling. Installation Guide: Have someone hold the hatch, hood, trunk or rear window open while replacing the lift support. Do not use a prop rod.1,Turn off ignition. If old lift support has a window defogger electrical connector, carefully disconnect the fittings.2,Before removing old lift supports, examine any hardware provided to determine which components must be reused.3,Work on lift supports one at a time and do not remove both lift supports at the same time. Replace one, then remove and replace the second one.4,The new lift support must be installed in the same position as the old one which was removed, unless otherwise instructed. Do not nick or scratch chrome rod.5,Compare the end connectors of your lift support to the illustrations provided and see additional instructions below.Removable Ball ConnectorsIf your lift supports come with the ball connectors, remove old lift support by prying the retaining ring, cap lock or the security lock ring. Then press new lift support onto ball stud and properly install retainer. Eyelet ConnectorIf your lift supports come with the eyelet connector, remove old lift support by unscrewing the mounting bolt or retaining clip. Install new lift support by using mounting bold or removing the retaining clip. Then, remove old lift support by prying the retaining clip off. Install new lift support by pressing against the vehicle mounting stud until the retaining clip snaps into place. Eyelet Connector with Retaining ClipIf your lift supports come with the eyelet connector with retaining clip, remove old lift support by prying the retaining clip off. Then, install new lift support by pressing against the vehicle mounting stud until the retaining clip snaps into place. Keyhole Slot ConnectorIf your lift supports come with the keyhole slot connector, slide the lift support so the keyhole slot can be lifted off the vehicle mounting stud. Then install the new lift support by sliding the keyhole slot over the vehicle mounting stud.

Price: 62.99 USD

Location: shenzhen

End Time: 2025-01-14T08:25:06.000Z

Shipping Cost: 0 USD