2PCS Battery Disconnect Switch, 12V 24V Battery Isolator Cut off Power Kill Swit

Description: OPERATION: You will get 2 x Battery Disconnect Switches, 6 x Keys, 2 x Waterproof Covers. This battery kill switch is used for DC 12V 24 V systems, On/Off 2 position, Continue current: 100A. Intermittent current: 750A (5 min)DIMENSION: 2 brass terminals: 5/16", 2 mounting holes: 3/16". The base is 2.35” in diameter, the post that holds the key stands up 1 1/4” from the base, and it’s diameter is 7/8”WATER-RESISTANT: This battery master switch comes with 6 keys and 2 weather covers. The red keys can snug fit to curb battery drain and theft. The black cover can prevent from dust and water, prolong their lifespanHEAVY DUTY: Copper terminals with stainless steel hex nuts for improved continuity. Rust and corrosion resistant. The keys are made of plastic and fit perfectly on the thumb for ease of useNO WORRY ABOUT DEAD BATTERY: This keyed battery disconnect switch provides a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain. It also acts as a deterrent for car theft. This battery kill switch can be found in boats, RVs, and some cars Product Description SPECIFICATION: Voltage: 12V 24VContinue: 100AIntermittent Current: 750A (5 min)Installing Sizes and Hoses: 40mm/22 brass terminals: 5/16" (0.31inch)Operation: ON/OFFRound disk diameter: 2.36'' (60mm)Feet Spacing: 1.43'' (36.5mm)Working Temperature: -40°~80°Waterproof: IP43 EASY TO INSTALL 1. Mark the position where the switch needs to be installed on the front of the battery panel, and cut a hole to fix the switch. (You can refer to the product size to determine the diameter of the hole.) 2. Disconnect the negative terminal (usually black, marked with a "-"). Do this first to avoid the possibility of an electrical short or shock, which is not good for your vehicle or your body. 3. Disconnect the battery positive terminal (usually red and marked with a "+"). 4. One of the two feet of the switch is connected to the negative pole and the other to the positive pole. After the connection is completed, the power can be normally turned on, and the switch can also be cut off normally. HIGH QUALITY Copper terminals with stainless steel hex nuts for improved continuity. Rust and corrosion resistant. The keys are made of plastic and fit perfectly on the thumb for ease of use WORKING TEMPERATURE It can withstand a working temperature between -40° and 80°, and it can work normally even in harsh environments FEATURES: √ Sturdy Battery Isolator and Easy operation: disconnect and reconnect battery with turn on/off key.√ Effective to solve these problems: electric leakage and loss of electricity, extend battery life.√ Quick Battery Disconnector (Cut off Switch) , ideal for maintaining the batteries charge over time.√ Battery master cut out switch for wiring into the positive side of the battery cables. Please noted, this only disconnects the battery, not the whole ignition system.

Price: 23.83 USD

Location: Palm Coast, Florida

End Time: 2024-11-07T11:55:37.000Z

Shipping Cost: 0 USD