21Pc Heavy Duty Ball Joint Press & U Joint Removal Tool Master 2&4WD Adapter Kit

Description: Product DescriptionUse the 8MILELAKE Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool Full Set to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.Specifications:Package Quantity: 21 piecesTools Material: carbon steelSurface: black-oxide finishCompatibility:Removes and replaces all sizes of press-fit ball joints found on domestic and import rear wheel drive cars, as well as Ford, GM and Dodge 2 and 4 wheel drive pickups, vans and SUVs. Replacement parts available.Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and pickup trucks that have press-fit type ball joints.Remove a Ball Joint1. Assemble the Ball Joint Press over the vehicles control arm. Select the correct size Receiving Tube, and position it under the vehicles ball joint.2. Place the Removal Adapter between the Receiving Tube and the Jackscrew.3. Then, place the Installation Adapter between the top of the ball joint and the Ball Joint Press.4. Tighten the Jackscrew until the Receiving Tube contacts the vehicles control arm.5. Check the alignment of all the Ball Joint Kit parts, and continue tightening the Jackscrew until the vehicles ball joint is removed.Install a Ball Joint1. Clean the vehicles control arm, and coat the inside diameter of the control arm with a light lubricant.2. Insert the replacement ball joint as straight as possible into the vehicles control arm.3. Assemble the Ball Joint Press over the vehicles control arm. Select the correct size Receiving Tube and position it on top of the vehicles control arm.4. Place the Installation Adapter between the Receiving Tube and the Ball Joint Press. Then, place the Removal Adapter between the ball joint and the Jackscrew.5. Check the alignment of all the Ball Joint Kit parts. Then, tighten the Jackscrew until the vehicles ball joint is firmly sealed.Adjust Anchor Pins1. To remove the brake anchor pins, remove all lock ring retainers from the Brake Anchor Pins.2. Position the Ball Joint Press over the brake spider.3. Tighten the Jackscrew until the anchor pins can be removed.4. To install the brake anchor pins, insert the brake anchor pins. Then reinstall the lock ring retainers on the brake anchor pin.5. Unscrew and remove the Ball Joint Press.Dis/Assemble a U Joint1. To disassemble a "U" joint, remove any external and/or internal lock rings.2. Position the Ball Joint Press around the drive shaft yoke and tighten the Jackscrew until the first bearing is removed.3. Reposition the Ball Joint Press and remove the second bearing.4. To assemble a "U" joint, clean all dirt and oil from the yoke area.5. Align the replacement bearing and Ball Joint Press as straight as possible over the yoke. Press the replacement bearing into the yoke, and reassemble the external/internal lock ring.6. Reposition the Ball Joint Press and second replacement bearing as straight as possible over the yoke, and press the bearing into the yoke.7. Reassemble the external/internal lock ring.Package ContentThis set includes:1PC Center Plug: OD 7/8" 1PC "C" Frame Press 1PC "C" Frame Screw1PC Install Adaptor 1PC Remover Adaptor 1PC Receiving Tube: 2-1/4" X 3"1PC Receiving Tube: 1-3/4" X 2-1/2" 1PC Receiving Tube: 1-3/4" X 2"1PC Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 3/4" 1PC Receiving Cap Adaptor O.D. 2-1/4", I. D. 2" Length 2"1PC Remover Installer O.D. 1-7/16", I. 3/4" Length 1" 1PC Receiving Cup O.D. 2-1/2", I. D. 1-1/4" Length 1-1/2"1PC Receiving Tube O.D. 2-3/4", I. D. 1-7/16" Length 2-1/4"1PC Receiving Tube O.D. 3", I. D. 2-3/4" Length 2-1/4"1PC Receiving Cup O.D. 2-1/4", I. D. 2" Length 2"1PC Receiving Tube O.D. 2-1/2", I. D. 2-1/4" Length 2-3/4"1PC Installing Cup O.D. 2", I. D. 1-3/4" Length 2-5/16"1PC Receiving Cup O.D. 2-7/8", I. D. 2-5/8" Length 3-7/8"1PC Receiving Cup O.D. 2-7/16", I. D. 2-3/16" Length 3-3/16"1PC Install Cup O.D. 2", I. D. 1-3/4" Length 3" 1PC Blow carry caseQuality ProductsHave peace of mind knowing that your order will arrive original factory sealed packaging. That means that youll have the full force of the manufacturers warranty to protect your purchase.Fast and Free ShippingYoure already purchasing the item. Why pay additional for shipping, especially slow shipping? We get your order shipped out and delivered to your doorstep as quickly as possible.CommitmentWe are committed to making sure that you leave this transaction satisfied. That means having access to real people that get your questions and concerns answered quickly. Give us a shot and we will make sure that you will look to us again! inkFrog Analytics

Price: 86.06 USD

Location: US

End Time: 2023-12-02T09:05:47.000Z

Shipping Cost: 0 USD