1PC LOCTITE 638 50ml Retaining Compound Glue Green general purpose cylindrical

Description: Store CategoriesStore CategoriesMOLYKOTEDOW CORNING, MOLYKOTEKLUBERSuperLubeKrytoxDow, DOWSILShinEtsuBELZONAThreeBondHenkel / Loctite / PattexCastrol / BPJET-LUBE, DEACONPLEXUSELKALUBTHKSKFOKSNSKSANKOLEPOXYCEMEDINECRCValvolineNICHIMOLYLIQUIMOLY3MGorilla GlueFUCHSShellMobil, SHCChevronLUBEKYODO YUSHI, CITRAXFOMBLIN, SOLVAYYamaichiUHUElmo RietschleBECKERParkerKemaSikaAUTOLROCOLLeybonolBIRALWACKERDivinolDevconElmer'sEDWARDSEvonikLubriplateH.B. FullerWeiteanElkemMomentiveTitebondRoyal Purple SynergyTotalEnergiesDiscount Limited TimeOther1PC LOCTITE 638 50ml Retaining Compound Glue Green general purpose cylindrical Product Description LOCTITE 638 Retaining Compound 50ml one Bottle Please leave us Positive Feedback if you are Satisfied with our product & service! We Strongly Appreciate it ! If you have any other question about the Product / Shipment / Further Cooperation Please Contact Customer Service. High strength, high-temperature resistant bonding of cylindrical parts This anaerobic-curing retaining compound is designed for bonding cylindrical fitting parts, particularly where high strength with high temperature resistance is required. All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere. For a retaining compound offering high strength on all metals, including passive substrates, try LOCTITE® 638. You can expect high temperature performance and good oil tolerance, a fixture time of just four minutes, and gap fill of 0.006" to 0.01" (0.15 mm to 0.25 mm). It even tolerates minor surface contaminants, including industrial oils. A high viscosity product, it’s ideal for shafts, gears, pulleys, and similar cylindrical parts, and can also be used for high strength threadlocking and thread sealing applications. Operating temperature is -65°F to 355°F (-55°C to 180°C). LOCTITE 638 meets the performance requirements of KIWA GASTEC QA AR 214 for admixtures up to and including 100% hydrogen gas on metal threaded fittings – certifications are available in select countries. Ideal for shafts, gears, pulleys and similar cylindrical parts High strength on all metals, including passive substrates (e.g. stainless steel) High temperature resistance Fluorescent under UV for quality control Hydrogen gas approval for sealing threaded metal fittings according to KIWA GASTEC QA AR 214 Product category:Retaining compounds Technologies:Acrylates, anaerobic cure Agency approvals / certificates / specifications:DVGW (EN 751-1): NG-5146AR0619,NSF P1 Reg. No 123010,WRAS (BS 6920): 0511518 Application method:Dispense system,Manual Applications:For close fitting cylindrical parts,For slip fitted parts,Retaining Color:Green Cure type:Anaerobic cure Fixture time:4.0 min. Gap fill:0.15 mm - 0.25 mm Key characteristics:Fluorescent,Oil tolerant,Strength: high strength,Temperature resistant,Viscosity: high viscosity Operating temperature:-55.0 °C - 180.0 °C (-65.0 °F - 355.0 °F) Physical form:Liquid Recommended for use with:Metal: steel Shear strength, Steel:31.0 N/mm² (4500.0 psi) Viscosity:2500.0 mPa·s (cP) Shipping PolicyAftersale PolicyContact usShipping Policy Aftersale Policy Contact us We Sale Various Brand & Type of Lubrication Grease & Other Chemical. Please leave us Positive Feedback if you are Satisfied with our product & service !!! We Strongly Appreciate it !!! If you have any other question about the Product / Shipment / Further Cooperation Please Contact Customer Service. Copyright © 2023 Dianxiaomi

Price: 28 USD

Location: Shenzhen

End Time: 2025-01-14T10:56:33.000Z

Shipping Cost: 0 USD