1Lt Engine Oil Motul 8100 Eco-Clean 0W-20 100% Synthetic Acea C5/C6 955535

Description: HomeAbout UsContact usFeedback --> 1LT ENGINE OIL MOTUL 8100 ECO-CLEAN 0W-20 100% SYNTHETIC ACEA C5/C6USE100% synthetic high performance "fuel saving" lubricant developed specifically for builderswhich prescribe the use of engine oil with a low HTHS viscosity level (≥ 2.6 mPa.s) and with reducedsulphated ash (≤ 0.8%), phosphorus (0.07% ≤ x ≤ 0.09%) and sulfur (≤ 0.3%), "Mid-SAPS".compliant with ACEA C5, ACEA C6, API SP and/or ILSAC GF-6a standards.Compatible with catalytic converters and diesel particulate filters (DPF) and petrol (GPF).Some engines may not be compatible with this type of lubricant. Before use, always refer to the vehicle's use and maintenance manual.PERFORMANCESThe ACEA C5/C6 specification requires the lubricant to have significant performance in terms of resistance of the fluid film,protection from low rpm knocking (LSPI) and reduction of emissions during application on high-speed enginespower. The ACEA C5/C6 specification requires a reduction in friction to achieve a significant reduction inconsumption.Motul 8100 Eco-clean 0W-20 with a 100% synthetic base and a reduced level of ash allows exceptional resistance of the lubricant film, reduces friction in the engine and is compatible with exhaust gas after-treatment systems.I unload.The SP API specification is backwards compatible with the SN API and all previous API specifications. In addition to this, the SPallows high performance and protection from low rpm knocking (LSPI) in compact turbo enginesdirect injection petrol.Based on API SP, ILSAC GF-6A for 20 viscosity oils is even more stringent with regards to Fuel Economy requirements,but it also increases the change interval, improves the cleaning of pistons and sealing rings, and is more compatiblewith gaskets and has a reduced phosphorus content to be compatible with post-treatment systemsexhaust gases. The ILSAC GF-6A specification also allows for greater engine protection when usingpetrol containing up to 85% ethanol (E85).The BMW LongLife-17 FE+ specification replaces the previous BMW Longlife-14 FE+ required by BMW e petrol enginesMINI equipped with particulate filter (GPF). This specification is suitable for BMW N20 and Bx8 petrol engines producedsince 2014 used in the countries of the European Union, Norway, Switzerland and Liechtenstein, as well as in the USA and Canada. The BMW LL-17 FE+ specification associated with ACEA C5 means that MOTUL 8100 Eco-clean 0W-20 allows asignificant fuel savings (up to 3% when compared with a standard BMW LL-01 lubricant) while respecting theat the same time the strict robustness parameters required by the BMW LL-04 specification. this improvement allows theachievement of the low levels of CO2 emissions required of manufacturers.This 100% synthetic lubricant was developed to provide optimal lubrication in Mercedes Diesel engines andlatest generation petrol that require the MB 229.71 or MB 229.72 specification.Some latest generation high performance Mercedes Diesel and petrol engines from MY2016 onwards require aspecific lubricant as they are extremely stressed, with high loads, they work at high temperatures with performances equivalent to or superior to the old generation engines they replaced.The MB 229.71 and 229.72 specifications are particularly stringent in terms of Fuel Economy and associated with ACEAC5/C6 ensure that MOTUL 8100 Eco-clean 0W-20 offers significant performance levels in terms of energy savingsfuel (up to 1% compared to a 5W-30 MB 229.51). this improvement allows the bass to be achievedCO2 emission levels required of manufacturers, such as Mercedes. The MB 229.71 and 229.72 specifications are unique and non-uniqueThey are backwards compatible, so don't buy other Mercedes specs.OPEL/VAUXHALL is now part of the PSA Group, the new Opel Vauxhall specification OV 040 1547 - A20, for engines oflatest generation requiring a 20 viscosity lubricant, was established to replace the GM dexos2 specificationgen2 which will remain in use only for GM and its brands.The STJLR.03.5006 specification covers many of the latest generation Jaguar Land Rover engines, V6, V8 and L4 petrol engines,including 3.0 6-cylinder and 5.0 8-cylinder petrol engines, as well as 4-cylinder Ingenium engines requiring protectionby the LSPI.The FIAT 9.55535- GSX and DSX specifications require a lubricant that is both SAE 0W-20 and mediumash level to lubricate latest generation FIAT diesel and petrol engines, including Alfa Romeo 2.2 JTD enginesStelvio and Giulia and the 1.6 Multijet Adblue engines.Within the FCA Group, the Chrysler MS-12145 specification replicates the characteristics of the FIAT 9.55535-GSX inChrysler applications.Some of the newer gasoline engines require an API SP-RC, API SP, API SN, API SN-RC, API SN Plus and ILSACGF-6A or GF-5 to ensure maximum performance and durability. The specifications Ford WSS M2C 947-A1 (level GF-5) and 921-A1 (GF-6 level) reflect these requirements.MOTUL 8100 Eco-clean 0W-20 perfectly meets manufacturers' requirements in terms of high performance and durability.MOTUL 8100 Eco-clean 0W-20 is particularly resistant to high temperatures for better control of consumptionof oil and a reduction in wear thanks to its excellent lubricating properties.SAE 0W-20 viscosity reduces hydrodynamic friction, resulting in fuel savings when cold.It allows a high fluidity of the lubricant at start-up, a rapid achievement of the pressure in the circuit, of theengine rpm and normal operating temperaturesOFFICIAL SELLERS ConditionsPaymentsShippingContactsEstimates Conditions Payments Shipping Contacts Estimates --> Some engines may not be compatible with this type of lubricant. Before use, always refer to the vehicle's use and maintenance manual. Motul 8100 Eco-clean 0W-20 with a 100% synthetic base and a reduced level of ash allows exceptional resistance of the lubricant film, reduces friction in the engine and is compatible with exhaust gas after-treatment systems. since 2014 used in the countries of the European Union, Norway, Switzerland and Liechtenstein, as well as in the USA and Canada. The BMW LL-17 FE+ specification associated with ACEA C5 means that MOTUL 8100 Eco-clean 0W-20 allows a specific lubricant as they are extremely stressed, with high loads, they work at high temperatures with performances equivalent to or superior to the old generation engines they replaced. CO2 emission levels r Related keywords engine oil oil engine synthetic oil 0w-20 motul oil oil synthetic motul c5 motul 8100 eco-clean 0w-20 oil 0w-20 motul 0w-20 1lt 8100eco-clean c5 1lt 8100eco-clean c6 motul 8100 eco clean 0w20 1lt motul 8100eco-clean 1lt 8100eco-clean 955535 1lt 8100eco-clean 20 0w-20 motoröl öl 0w-20 motorenöl 0w-20 engine oil 8100eco-clean c6 engine oil 8100eco-clean c5 0w-20 c5 synthetic oil. 1lt motul c5 1lt motul c6 engine oil 8100eco-clean 955535 Provided by

Price: 105.58 USD

Location: Castello del Matese

End Time: 2025-01-11T19:57:25.000Z

Shipping Cost: 0 USD