1997 Bridgeport Series I CNC Mill w/Acu-Rite MillPWR MP2

Description: 1997 Bridgeport Series I 48" Table Manual Mill converted to CNC Mill w/Acu-Rite MillPWR MP2 Ball Lead Screws X & Y SERIOUS BUYERS PLEASE. I JUST LOST 4 DAYS ON THIS ITEM BEING SHOWN TO THE PUBLIC DUE TO A POTENTIAL THAT DECIDED TO BACK OUT AND NOT PAY FOR THIS 4 DAYS LATER. ANYWAYS... Bridgeport Knee Serial Number: BR275455 MFG Year: 1997 Drive Serial No. 2J 162976 Table Length: 48" Chrome Ways 2HP, 3-Phase Variable Speed Motor (200V, 208V, 220V, 230V, 480V @ 60HZ) (200V, 220V, 380V, 415V, 440V @ 50HZ) Factory original paint job. Kurt Vice shown in photo is NOT included. Bijur Oiler, electric, currently not hooked up for some reason. Westco Tool Mist Tank mounted on side. Tank is good but the spray nozzle most likely needs to be cleaned out or replaced (These are not that expensive). Acu-Rite MP2 Control Console P/N: 2003214 S/N: 00060199 Rev. A Acu-Rite DRO X & Y MillPWR 2. Floppy disk drive (USB upgrade kit is available from manufacture). Acu-Rite KT-3D Digital Edge Finder Acu-Rite Remote Hand Held Pendant Ball Screw Conversion. Consisted of: Longitudinal screw and nut, cross feed screw, nut and yoke. Partially seen in photos. Acu-Rite MillPWR conversion kit alone runs about $19,000 Unit has very low usage. Was located at a private residence from 2005 til 2017 until I acquired it. It has been sitting in my shop unused ever since. Minor flash rust on some of the table but its easily scotch brighted off with a little bit of oil. Buyer responsible for machinery movers and shipment costs. Contact me for any questions and or requests. Specifications: SERIES I Range Table Travel (X-Axis, end of table to end of saddle) without Power Feed: 31in. (787mm) with Power Feed: 30 in. (762mm) Saddle Travel (Y-Axis) 12in. (305mm) Quill Travel 5 in. (127mm) Knee Travel (Z-Axis)* 16 in. (406mm) Ram Travel 12 in. (305mm) Throat Distance (min.) 6.75 in. (171mm) Throat Distance (max.) 18.75 in. (476mm) Table to Spindle Nose Gage Line (min.) 2.5 in. (64mm) (max.) 18.25 in. (463mm) Table Overall Size 49 x 9in. (1245 x 299mm) Working Surface 49 x 9in. (1245 x 229mm) T-slots Centers 3 @ 2.5in. (64mm) T-slot Size 0.625in. (16mm) Height above Floor (max.) 47.25in. (1200mm) Weight of Workpiece (max.) 750lbs. (340kg.) Spindle (2J Head) AC Power Rating (30 min. duty cycle) 3 HP (2.2 kW) (continuous) 2 HP (1.5 kW) Spindle Taper: R-8 Tooling: R-8 Collets (not included) Speed Range High (infinitely variable) 500 – 4200 RPM @ 60 Hz Low 60 – 500 RPM @ 60 Hz Power Quill Feed (factory manual settings) (3) 0.0015 in./rev (0.038mm) 0.003 in./rev (0.076mm) 0.006 in./rev (0.152mm) Drilling Capacity Power Quill Feed 3/8 in. (9.5mm) Milling Capacity (mild steel) 2 CI/min. Boring Range (mild steel) 6 in. dia. (152mm) Spindle Diameter 1.875 in. (48mm) Quill Diameter 3.375 in. (86mm) Positioning Feed rate Range (X, Y) 0.50-35 I.P.M. (13-889mm/min) Minimum Increment 0.0001in. (0.003mm) Space and Weight Floor Area 8.3 x 7.8 ft. (2.53 x 2.4m) Height 87 in. (2.21m) Net Weight 1930 lb. (875kg) Shipping Weight 2075 lb. (941kg) Power Input Power 208/230/460 volts 3 phase, 50/60 cycle Power Capacity 4kVA Last photo is of a local machinery mover company (Gomez Machinery Movers), I've used many times. He's local and a good guy. Give him a call if you need any quotes to move this machine somewhere. Thanks.

Price: 14950 USD

Location: Torrance, California

End Time: 2024-11-26T00:51:59.000Z

Shipping Cost: N/A USD