1958 Oldsmobile Power Brake Booster Master Cylinder Conversion 88 58 Olds

Description: This is a complete bolt in kit that uses a modern power booster and dual circuit master cylinder mounted to the firewall using the bolt holes for the factory air box. It includes a new brake pedal that swings from a higher location (looks like it could be original too). A modern GM booster and master cylinder give a significantly improved braking feel and power while adding safety through the dual circuit system. This can be used with factory drums, disc/ drum or disc/ disc. Let me know what brakes you have at check out or after ordering and I will send the correct proportioning valve. Installation is fairly straightforward but it does require cutting of the firewall behind the air box (you can always put your original airbox back on and it would never show) and drilling of 3 lower screw holes to allow for heavier 5/16 bolts. This takes about 2-5 hours to install depending how well equipped the shop, rusted original parts, etc. You have to remove the driver side air box, master cylinder, original bake pedal, cut out an area about 3" wide area to make room for the pedal linkage, use nut-serts for all but the bottom 3 holes, and then this kit bolts in place of the firewall air box. By replacing the air box, you do lose the air and heat functions on the driver side. The passenger side air box is of course unaffected. Please know that some Oldsmobiles have a very large metal air ducting underneath the dash and this kit requires that you remove or modify that air ducting for clearance. I have not personally installed this kit on such a car so I do not have pictures or exact instructions. One look under your dash should tell you- it is a particularly large metal air ducting piece between the firewall and dash. Fits 1958 Oldsmobiles only. It fits all models of 1958 Oldsmobiles but does not fit any other year or make. What you get: New heavy duty Firewall Plate. Fits 1958 Oldsmobiles only Brake pedal bracket, goes through air vent hole Brake pedal W/ Bushings and rubber pad (appearance of a 1970's gm pedal)GM style brake boosterGM style master cylinder New high quality bolts 2X 3/16" brake lines- custom cut, bent, and flaredProportioning Valve + metal lines (mounts beneath MC, pictured) 3/8 Vacuum hose Misc. hardware Chrome Parts are available. Brake Booster and Master Cylinder in chrome is +60. All metal parts are CAD designed and cut on a CNC plasma table for consistent high quality results, then powdercoated in satin black.

Price: 675 USD

Location: Battle Ground, Washington

End Time: 2024-10-09T15:39:12.000Z

Shipping Cost: 0 USD