Description: 18650 Type-C LCD 4/1 Channel Display Battery Capacity Tester Mah Lithium Digital Battery Detection Module for Battery Testing 18650 Type-C LCD 4/1 Channel Display Battery Capacity Tester Mah Lithium Digital Battery Detection Module for Battery Testing 4 Channel Display Battery Capacity Tester Information link: https://www.banber.com/gather/6374be9b2ee0e200077ec155 Features: 1.The product supports four-channel capacity and internal resistance measurement 2.Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode 3.Each channel is independent of each other, set separately, operates independently, and does not interfere with each other 4.18650 battery holder uses compact battery holder, suitable for flat-head battery measurement 5.Active cooling of fan supports overheating protection 6.Using DC two-wire method to measure internal resistance Note: lithium iron phosphate battery charging is not supported Parameters: Working voltage: DC5V Applicable battery: suitable for all batteries that meet the requirements of stopping discharge voltage of 2.5~3.5V and starting from 2.8V to 4.2V Power supply interface: Two-way Type-C power supply interface(Excluding power supply and power cord) System language: English/Chinese can be switched Test quantity: 4-way charging and discharging measurement Internal resistance measurement: support, use DC two-wire method to test internal resistance Charging function: support, automatic cut-off charging when fully charged (lithium iron phosphate battery charging is not supported) Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable Automatic charging and discharging: supported. The battery is fully charged at the end of automatic mode Cyclic charging and discharging: supported, 1~9 cycles adjustable (only supported in automatic mode) Status prompt: Supported Cooling mode: fan active cooling Overheat protection: support Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable gears Discharge current: the maximum current is about 1A, which is not adjustable, and does not support independent transformation Charging voltage: controlled by a special battery charging chip, with a maximum charge of about 1A and a full charge voltage of 4.2V Power-off saving: only save the set parameters, not the measurement data Product size: 150 × one hundred and three × 36mm Package size: 182 × one hundred and twelve × 50mm Data link: https://www.banber.com/gather/6374be9b2ee0e200077ec155 Package include: 18650 battery capacity internal resistance tester X1 Crowbar X1 18650 single channel tester The product supports single-channel capacity and internal resistance measurement Support separate charge and discharge, support up to 9 charge and discharge cycles in automatic mode There are 11 levels of adjustable discharge stop voltage Use DC two-wire method to test internal resistance, Chinese and English can be switched The maximum charge and discharge current is about 1A Notice: Some components will generate local high temperature during charging and discharging during use. Please ensure that the use environment is open and uncovered. It is better to increase the heat dissipation of the fan. In order to ensure that the battery clip is firm, the 18650 battery holder uses a compact battery holder, which is suitable for flat battery measurement! ! ! Does not support lithium iron phosphate battery charging Basic parameters Working power supply: DC5V power supply or 18650 battery (need to bring your own) Applicable battery: meet the discharge stop voltage of 2.5 ~ 3.5V, 2.8V starting ~ 4.2V fully charged battery is applicable Power supply interface: Type-C interface, self-prepared power supply line (C port mobile phone line) System language: Chinese (default), English Test quantity: 1 way charging and discharging measurement (only the right battery position) Internal resistance measurement: support, use DC two-wire method to test internal resistance Charging function: support, automatically cut off charging when fully charged (does not support lithium iron phosphate battery charging) Discharge function: support, automatically stop when the condition is reached, the discharge current is not adjustable Automatic charging and discharging: support, the battery is fully charged when the automatic mode ends Cycle charge and discharge: support, adjustable from 1 to 9 cycles (only supported by automatic mode) Status prompt: support Discharge stop voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, a total of 11 levels adjustable Discharge current: two resistors, the maximum current is about 1A, not adjustable, does not support independent transformation Charging voltage: controlled by a dedicated battery charging chip, the maximum charge is about 1A, and the full charge voltage is 4.2V Power-off save: only save the setting parameters, not save the metering data Product weight: 80g (net weight) 120g (including packaging) Product size: 110×88×30mm Package size: 153×100×42mm Data link: https://www.banber.com/gather/6365d57f9f8cae0007718211.html Package list: 18650 battery capacity internal resistance tester X1 hign-concerned chemical none diy supplies ELECTRICAL origin Mainland China type Electronic Device Battery Tester model 4-Channel 18650 choice yes semi_choice yes Product Dimensions: 10.0 inches x 10.0 inches x 10.0 inches. Weight: 0.26 kg
Price: 62.24 AUD
Location: Exford, VIC
End Time: 2024-12-29T12:01:20.000Z
Shipping Cost: 3.12 AUD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Return policy details:
Brand: stylianodiamanti_0
hign-concerned chemical: none
diy supplies: ELECTRICAL
origin: Mainland China
Type: Electronic Device Battery Tester
model: 4-Channel 18650
choice: yes
semi_choice: yes