12V 240A Kill Switch Automatic Power Shut Off Switch Remote Battery Disconnect

Description: 12V 240A Kill Switch Automatic Power Shut Off Switch Remote Battery Disconnect Features: 【Detailed specifications】The working voltage is 12V. It has a starting current of 500A, an instantaneous current of 2400A, a discharge threshold of 11.9V ± 0.2V, a 5-minute discharge delay cut-off, a remote control distance of 160 feet, and an IPX6 waterproof rating, with sound and light prompts. 【Energy saving operation】Utilizing the dual magnetic function of pure copper, zero power consumption is achieved after conduction, and the relay can maintain conduction and original memory state without the need for power supply. 【Intelligent Led Voltage Display】The LED voltage display detects the battery voltage at any time, if the voltage is lower than 11.8V, the remote kill switch will automatically cut off the power supply after 120s to save electricity. If the voltage is higher than 13.2V, the remote control will be disabled to prevent accidental action to turn off the power while driving, and the power supply can only be controlled by the button on the switch. 【Safe and Easy Installation】Designed specifically for non-destructive installation using original wiring, without the need to cut or modify cables. 【Protect the Battery】Using this car battery kill switch can avoid power consumption due to long-term parking, good point of electronic equipment, line aging, forgetting to turn off the light, etc. It can effectively protect and prolong the life of car battery. 【Widely Applications】This automatic kill switch Suitable for most 12V cars, boats, RVs, trailers, trucks, beach bikes, UTVs, motorcycles. Remote control matching instructions: 1. Interlock mode (applicable to vehicle system control) - Press the manual button ON continuously for 3 seconds, and the code indicator light will flash 3 times to enter the learning mode. Press the button on the remote control, and the code indicator light will flash 3 times after successful code matching. Then press the other button on the remote control, and the code indicator light will flash 3 times after successful code matching; 2. After entering the learning mode, if the learning code indicator light does not receive a remote control signal within 30 seconds, it will automatically exit the learning mode; 3. Clear code - Long press the manual button ON to flash the code indicator light 8 times, indicating that the clear code is complete (long press the manual button ON to display the indicator light flashing 3 times, 4 times, 5 times, and 8 times in sequence; among them, flashing 3 times is the interlock mode learning state, flashing 4 times is the self-locking mode learning state, flashing 5 times is the jog mode learning state, flashing 8 times is the clear code state); 4. A set of 20 codes can be paired with 10 different remote controls simultaneously. Package Includes: 12V car battery power-off switch*1 Key*2 Gaskets*2 Anti slip pad*1 English manual*1 NOTE:The remote control is only available between 11.8v and 13.2v. It is prohibited to use other voltages to ensure that they match, otherwise the remote control will not be available.

Price: 29.09 USD

Location: Walnut, California

End Time: 2024-09-08T03:04:35.000Z

Shipping Cost: 0 USD