1/2" Brass Insert .372outside Diameter .72 Length 22013 (Pack Of 10)

Description: 1/2" Brass Insert .372outside Diameter .72 Length 22013 (Pack Of 10) Specifications: A :0.72B :0.37SIZE :1/2”WALL :0.062WEIGHT :0.030LbsSHAPE :Sleeve Description: 1/2 BRASS INSERT .372OUTSIDE DIAMETER .72 LENGTH. Typical Application :Use with copper, aluminum and thermoplastic tubing. Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Not recommended for application using gaseous media.Pressure Ranges :See table above for working pressures at 73°FTolerance :+/- .02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Conformance :Meets specifications and standards of ASA, ASME and SAE.Used With :Aluminum, copper, brass and plastic tubing. Plastic tubing requires insert. Not recommended for steel tubingAssembly Instructions :1-Cut tubing to desired length.2- Lubricate threads and assemble nut to fitting body.3- Insert tubing into fitting body. Be sure tubing is bottomed on fitting shoulder.4- Slide nut and then sleeve on tube. Threaded end. “A” of nut must face toward fitting.5-Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart below.

Price: 4.97 USD

Location: Kew Gardens, New York

End Time: 2025-01-27T08:27:09.000Z

Shipping Cost: 15 USD