110V Pipe Fusion Welder 2.48"-6.29" Pipe Soldering Iron Plastic Hot Melt Tool

Description: Pipe Welding Machine Pipe Soldering Iron Plastic Hot Melt Tool Description： This product is suitable for hot melt socket welding of thermoplastic pipe such as PPR/PE/PB.High quality design and construction provides an excellent machine for welding both on the worksite and in the factory. The use of high quality Aluminum casting allows for lower weight without compromising strength and performance. Advantage: 1. Accurate temperature control, high safety index, and strong environmental adaptability. 2. The heat transfer plate is made of aluminum alloy, with high thermal conductivity and strong antioxidant energy. 3. The structure is sturdy, convenient and fast, and not easy to leak. 4. The hot melt mold head adopts non stick high-temperature coating technology, with a long service life. 5. Replacing the mold head can be used for connecting plastic pipes and fittings of various caliber sizes (specifications: φ 63-160mm). Specifications: Model No. 2.48-6.29”(63-160MM) Materials Aluminum alloy casting, 45# steel Welding level(Φ) 63mm(2.48”)、75mm(2.48”)、90 mm (3.54”)、 110 mm (4.33”)、160 mm (6.29”) Docking deviation ≤0.3mm Power of Heater 110V Working temperature 300℃ Temperature deviation ±5℃ Environment temperature -5℃-40℃ Time required to reach soldering temperature <20min Materials can be welded PE PPR PB PVDF Weight 117.7LB(53.5kg) Package Size 29.5*19.7*22.1"(75*50*56cm) Details: Left and right division of labor fixture The left side can fix the pipe, the right side can fix the pipe, and the middle can remove the heating plate, replacing manual welding. The welding effect is good, labor-saving and worry free. Card slot type retainer Firmly fix the pipe fittings to prevent them from falling off. Thickened high power heating plate Aluminum heating plate for faster heat conduction and lighter weight. Adjustable top column With the front slot fixator, the pipe fittings are firmly supported, the position can be adjusted at will, and then locked. Applicable Materials: Note: 1. Fix the welding device and install the heating end. Place the welding device on the rack, install the corresponding heating die according to the required pipe specifications, and tighten it with an internal hexagonal wrench. Generally, the small one is at the front end and the large one is at the rear end. 2. Turn on the power and pay attention to the changes in the indicator light until the welding machine enters the working temperature control state before starting operation. 3. Push vertically cut pipes and fittings into the fusion splicer die without rotation, and operate as required. After reaching the heating time, immediately remove the pipe and fittings from the mold head and quickly and evenly insert them into the required depth without rotation, forming a uniform flange at the joint. On the Eccentricity Problem 1. If the top and bottom are not aligned, the pipe needs to be raised to the same level as the fixture. 2. If the left and right are eccentric, the screws on the pipe clamp can be loosened and the position can be adjusted according to actual needs. Packing List: Item Number: Pipe Welding Machine Pipe Soldering Iron Plastic Hot Melt Tool 145035 On Dec 6, 2023 at 21:09:09 PST, seller added the following information:

Price: 760 USD

Location: Rancho Cucamonga, California

End Time: 2024-02-07T15:55:01.000Z

Shipping Cost: 0 USD