Description: Custom made 10L050 toothed timing pulley with belt guide flanges. Made for the Servo motor mods using industrial sewing machine motors. Measure and check fit first. Note: 10L050 timing pulleys use an American size belt! They will not fit the belt on your made in China machine. You will have to convert the entire drive to include the other pulley. Bore is 15 mm. Key way slot: 5 mm Belt width is 1/2" - Space between flanges is 0.55"Flange outside diameter 37 mm or 1.450" Total height 28 mm See images for measurements. Designed to fit a few different Chinese motors found on new and old lathes, mills and other machinery. Make sure you measure your motor and check for clearance These pulleys have a wide speed range, are very efficient, do not slip or squeal and much less noise than std v belt drives. Teeth on the belts are molded to conform with and engage the teeth on a mating L050 toothed belt. Ships USPS first class padded envelope Clearance item: No returns.
Price: 13 USD
Location: Haines City, Florida
End Time: 2023-11-14T21:34:45.000Z
Shipping Cost: 6.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: The Custom Crafter
Number of Teeth: 10
Type: Timing Belt Pulley
Belt Width: 1/2 inch
Model: lathe conversion
Bore Width: 10 mm
MPN: Does Not Apply
Modified Item: Yes
