10KG SUNLU 3D Printer Resin 1KG UV 405nm Standard Resin for LCD/SLA/DLP

Description: Material Standard Resin Surface Hardness (Shore D) 80-85 body contraction (%) 7-9 Tensile Strength (MPa) 20-40 Elongation (%) 5-15 Bending Strength (Mpa) 25-45 Flexural Modulus (Mpa) 650-900 Lower exposure time (s) paint screening machine 20-80; Black and white machine 10-60 Lowest layer 3-5 Normal layer exposure time (s) paint screening machine 4-15; Black and white machine 1.5-4 Stroke distance (mm) 6-10 Lifting speed (mm/min) 60-90 Lifting speed (mm/min) 120-180 colour Black/White/Dark Gray/Skin/Clear features 1. Standard photosensitive resin, suitable for beginners and model hand printing,2. Easy to form, good precision, low odor, high cost performance Precautions: 1. Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight;2. Do not take it orally, keep it away from children, wear gloves before use, avoid direct contact with the skin, and keep the room ventilated; do not enter the eyes, in case of accidental contact, rinse with plenty of water as soon as possible.3. The printed resin model needs to be cleaned with high-concentration alcohol (recommended above 95% concentration, the higher the better) for about 30s; after cleaning, wait for the alcohol to dry and then perform secondary curing, so that the best performance can be obtained;4. Do not pour the used resin in the trough back into the unused resin, and do not leave the resin in the trough for a long time without use. The contamination of the resin affects the printing effect;5. Store in the dark at room temperature. The ultraviolet rays in the sun will cure the photosensitive resin; it is recommended to store it at an ambient temperature of 15-35 °C. The lower the temperature in winter, the higher the resin viscosity;6. Sealed storage to avoid dust or moisture, which will affect the print quality

Price: 127.7 USD

Location: Los Angeles, California

End Time: 2024-07-15T09:18:34.000Z

Shipping Cost: 0 USD